EMC 30 T
This type of unit was created following a specific request from the public concessionaire RAI in order to have the advantages of modular units even in the presence of network separators which due to their size do not find room in 19″ rack units. It is supplied with powers from 15 to 30 KVA, insulation up to 25 KV, with voltage and lightning current arresters housed inside which can be inspected via a key-operated door. The distribution system complete with general, priority and auxiliary MV insulation monitor is protected by a door equipped with a porthole against accidental manoeuvres, all the protections present on the rack unit models are supplied on request and are refined according to customer requests .

EMC 15 T
This type of unit was created following a specific request from the public concessionaire RAI in order to have the advantages of modular units even in the presence of network separators which due to their size do not find room in 19″ rack units. It is supplied with powers from 15 to 30 KVA, insulation up to 25 KV, with voltage and lightning current arresters housed inside which can be inspected via a key-operated door. The distribution system complete with general, priority and auxiliary MV insulation monitor is protected by a door equipped with a porthole against accidental manoeuvres, all the protections present on the rack unit models are supplied on request and are refined according to customer requests .

EMC 10 T – 12.5 TS
The EMC 7.5 T – 10 T – 12.5 TS type modular electrical systems are approved for the entire Italian state in compliance with the CEI 17.13 reference standards and CE marked for the EU internal market, they are assembled with the switchboard regulations so much so that they are certified as true and its own single-phase LV distribution panels. In particular, these devices are made up of a general MT which, via a mains separator, powers a distribution panel which divides the available supply into a user for the main equipment (usable from the rear panel via an interlocked CEE socket) and one for the services and internal controls. The network is suitably filtered from electrostatic discharges through a double filter made up of encapsulated class 1 double threshold (FN / N-PE) primary lightning current arresters placed in an explosion-proof chamber upstream of the network separator and by power limiters. Class 2 overvoltage on the secondary circuit.

EMC 7.5 T
The EMC 7.5 T – 10 T – 12.5 TS type modular electrical systems are approved for the entire Italian state in compliance with the CEI 17.13 reference standards and CE marked for the EU internal market, they are assembled with the switchboard regulations so much so that they are certified as true and its own single-phase LV distribution panels. In particular, these devices are made up of a general MT which, via a mains separator, powers a distribution panel which divides the available supply into a user for the main equipment (usable from the rear panel via an interlocked CEE socket) and one for the services and internal controls. The network is suitably filtered from electrostatic discharges through a double filter made up of encapsulated class 1 double threshold (FN / N-PE) primary lightning current arresters placed in an explosion-proof chamber upstream of the network separator and by power limiters. Class 2 overvoltage on the secondary circuit.

EMC 7.5 M
The EMC 5-7.5 M type modular electrical systems are approved for the entire Italian state in compliance with the CEI 17.13 reference standards and CE marked for the EU internal market, they are assimilated to the switchboard regulations so much so that they are certified as real switchboards distribution of single-phase LV pursuant to Law 46/90. In particular, these devices consist of a general MT which, via a mains separator, powers a distribution panel which divides the available supply into a user for the main equipment (usable from the rear panel via an interlocked CEE socket) and one for the services and internal controls. The network is suitably filtered from electrostatic discharges through a double filter made up of encapsulated class 1 double threshold (FN / N-PE) primary lightning current arresters placed in an explosion-proof chamber upstream of the network separator and by power limiters. class 2 overvoltage on the secondary circuit.

EMC 3000HP-3U Rack High Effic
The EMC HP modular electrical systems are approved for the entire European Union in compliance with the CEI 17.13 reference standards and CE marked for the EU internal market, they are assimilated to the switchgear regulations, so much so that they are certified as real distribution switchboards of Single-phase LV pursuant to Law 46/90. In particular, these devices are made up of a general MT which, via a mains separator which powers a distribution panel which divides the available supply into a user for the main equipment (usable from the rear panel via an interlocked CEE socket) and one for the services and internal controls. The transformer is produced according to the double C technique with inverse hysteresis, this allows for no real inrush problems due to the pre-magnetization current and at the same time to have a yield greater than 98%, this means greater energy saving and low operating temperatures. The network is suitably filtered from electrostatic discharges through a double filter made up of encapsulated class 1 double threshold (FN / N-PE) primary lightning current arresters placed in an explosion-proof chamber upstream of the network separator and by power limiters. class 2 overvoltage on the secondary circuit. The tests before being put on the market were carried out in the laboratories of the University of Tor Vergata (Rome)

EMC 3.5 M
Born as an economical version of the EMC 5, this machine retains all the characteristics of its “big brother” with the sole limitation of the power used which has been limited to 3.5 KVA, still useful for covering a user of 3 KW. The EMC 3.5 M type modular electrical system is approved for the entire Italian state in compliance with the CEI 17.13 reference standards and CE marked for the EU internal market. It is assimilated to the switchgear regulations, so much so that it is certified as a single-phase LV distribution switchboard for pursuant to Law 46/90. In particular, this device consists of a general MV which, via a mains separator, powers an energy distribution panel that can be used from the rear panel via an interlocked CEE socket together with the services from the front panel with 2 bypass and Siemens type sockets. The network is suitably filtered from electrostatic discharges through a double filter made up of encapsulated class 1 double threshold (FN / N-PE) primary lightning current arresters placed in an explosion-proof chamber upstream of the network separator and by power limiters. class 2 overvoltage on the secondary circuit.

EMC 1.5 M
Born as a necessity to protect small systems sensitive to sudden power surges or interruptions, the EMC1.5 is contained in a 4 U rack powered via a VDE socket equipped with a mains filter; It features a general MT that powers a high-efficiency toroidal separator transformer, a secondary MT that powers 2 sockets in a universal configuration located on the front panel and a VDE female panel on the back for powering devices placed on a 19″ cabinet. It is supplied with a cord and two-way power strip. It can be supplied with Custom options such as: transformer up to 3KVA, internal saturated iron stabilizer, additional 8-cell mains filter, variable reactance inductors. On board it is equipped with a double L network filter and with FN-PE double threshold overvoltage limiters; finds its most acute use in protecting satellite receptions, small diffaltic systems and generally systems equipped with microprocessors sensitive to network spikes.
